While inefficient windows and cladding usually don't cause any immediate damage to the home, it makes sense to do so before gutters. First roof so as not to damage the new coating. The cladding, the ceiling and the band are as follows because the new metal band is installed behind the gutter. We've been lucky enough to do a few like that this year.
First we roofed, at which point we replaced all the covers. The same sequence as when you build a new one. Before installing the gutters, you must first place the fascia plate, followed by the ceiling. Once those two components are properly placed, you can start installing the gutter.
The roof or windows and doors must first be made. The roof is an independent element, nothing related to that area of work, except the gutters, but they are not yet part of that work that will be linked to progress. I wouldn't fix the gutters until the lining is done. If you establish that your roof also needs work or a replacement, make sure that the roof replacement is done before the coating is replaced.
There are some elements, such as the covers, that will be integrated into the roof and the coating, which, if done first on the coatings, would almost create double work. In addition, this also minimizes the chances of damaging the new coating if the roof is replaced at a later stage. In some cases, roofs may leak, the coating may crack, windows may have drafts, and gutters may sink at the same time. Installing the gutters before the roof means removing the new gutters to replace the ceiling, the fascia and the lining (which adheres to the gutters).
I suspect that the contractor who told me to fix the gutters before coating probably wanted those dollars instead of giving them to the coating company. Your roof system is comprised of materials such as asphalt or metal shingles, subfloor, band, ceiling and gutters, all of which play a crucial role in protecting your home from damage caused by water and moisture. While it's usually best to install a new gutter system after the roof, sometimes this isn't possible. All you have to do is have your roofer put on the gutter apron (flashing) before leaving the ice and water shield.
For that reason, most contractors recommend replacing the roof, windows, siding, and gutters in that order. Their roofs, cladding, windows and gutters together tackle the tremendous task of protecting your home from the elements. Not only does this lengthen the installation process, but it also puts your new gutter system at risk of being damaged during uninstallation and reinstallation. I have never washed the whole house, I have only retouched areas where there are ditches and algae grow (the biggest offender only in shady places).
This will be the time to inspect the exterior and make any repairs before it is covered with a coating or covered with gutters. They will determine if a repair is necessary or if a complete replacement of the gutters or lining is needed. From protecting your home from the threat of rainwater to protecting your family from inclement weather, your home's first line of defense against Mother Nature starts with asphalt shingles, vinyl siding, triple-panel glass and aluminum gutters. Over time, you may need to replace the fascia and ceiling, especially if there are signs of rotting and you're already thinking about installing new gutters.
If it suits you, the roof can also be done at the end, it's a matter of being careful with the gutters.